1 / 1
42deg 65mm whoop canopy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed so that the camera would hit the FC as little as possible. The ring is supposed to be stiff.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Purpose of this print was so that the camera wouldn't hit the FC. It has a ring which is quite strong so it act as a brace.
Print with supports. It's best to use straight and not tree ones.
The downside is that the camera sometimes rotates. So the next improvement would be to add tracks for the camera hole.
The side leg is weak when removing supports. Make sure not to tear it.
I used TPU96A from Rosa filaments.
The weight is from from ~0.6g, and my first prints were 1.02g.