Elegoo Neptune 2S 24v Safety Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An aluminum extrusion cover to prevent wear and damage to the 24v power cables on the Elegoo Neptune 2S.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 328
- Makes
- 2
- Views
- 1,445
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The cutout in the aluminum extrusion for the cables on the Elegoo Neptune 2S is a bit sharp on my printer and could cut into the wires if moving the printer around and modding. This cover snaps into the cutout and protects the wires. There are holes so that wires can still be ran through the extrusion if you want.
My print was done at 0.2 layer height with 3 walls but it left some artifacts around the tabs, 1 wall should print cleanly.
It's pretty straight forward but here is a video if you want to see further commentary and installation: