ArchKey (Corsair K70 MK2 Winkey Replacement Keycap)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a simple keycap for the winkey or any similar sized key in the same row, Arch logo can be replaced easily in blend file.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Unofficial fan-made Arch Linux keycap.
This model is licensed under CC BY-NC 4.0. The Arch Linux name and logo are trademarks of the Arch Linux project and are not covered by this license. This model is not affiliated with or endorsed by the Arch Linux project.
Tested on a Bambu Lab A1 using a 0.2 mm nozzle. I have successfully printed a similar keycap using 0.4mm so that should work as well
Optimal Printing Orientation
If you'd like to print in a different orientation, export the STL from the included Blend file. Select KeyswitchCylinderV3 when exporting.
Blend file
I included V3 and V4 key switch cylinders in the blender file which you can use to change the logo to anything you want.
to export, select either KeyswitchCylinderV3 (for printing in other orientations) or KeyswitchCylinderV4 (for printing in optimal orientation)
along with Arch Logo or whatever logo you importKeycapBody2KeyswitchCylinderSupport
