RMX: FatBurner – Ender 3 V3 SE (Rev. solid/gray stepper) Dual 5015 Fan Cooling Combined

FatBurner for the Creality Ender v3 SE (revision with unbranded/solid/untapped/gray extruder stepper motor).

V1(WIP):

• Has a bunch of holes for *Ruthex M3 heat-inserts, four aligned on the top(spare), one at the right-back(spare) and four of them designated for the bottom ToolBase

• Two M2 pass trough holes on the left side designated for the grip mount.

• Optimized a little so it needs less support.

• Base printed with PETG 0.12 + slim tree support@10deg. in approx 5.5hr.

TODO:

• Validation holes(to be drilled out) still fit the branded extruder stepper with tapped holes (If someone can confirm this, much appreciated) Update: Wont fit (I had to raise L/R base to level the ducts)

• Remove legacy holes

• Shorten/equalize duct distance to nozzle.

• Hot-end fan+LED mount(pending)

• Optimize ToolMount shape For cleaner print result.

• Front cover(pending)

V1.tools (pending):

ToolBaseV1:

Template model: The ToolBase with inner space(38.5...42.59 x 47.45 × 20.5 mm), with a ~1.5 mm in between stepper tolerance), works with the ToolMount of this FatBurner for further development, It incorporates integrated cable guidance, cutouts, and four M3 mounting points for M3x16 bolts,.

• Made for Ender-3 V3 KE Ceramic Heating Block Kit  https://store.creality.com/products/ender-3-v3-ke-ceramic-heating-block-kit

Hot-end fan cooling V1 (concept pending):

• Hot-end cooling fan mount
  Requires:
  x1 40mm Fan 24VDC (e.g Noctua NF-A4x10 24V PWM)
  x3 M3x16 bolts
  
  ToDo: Thinner walls, cleaner fan fit, 
  

GripV1:

Filament loading Grip left side https://www.thingiverse.com/thing:7018423  
Requires:
x2 M2x5 Pan head bolts
x2 Ruthex M2 heat-inserts 

LedBarV1:

• Particle LED bar to illuminate the object.
  Requires:
  adhesive 24VDC Silicone LED strip 8x2 cut at 50mm(=7 LED's),
  Metal strip 1x8x50 for underneath it,
  Fuse and Wires,
  Boolean modifier o.e to merge it in to your desired tool).

   
  

SisorBladeToolV1 (concept pending):

• Sisor Vinyl Cutter Tool
  Requires:
  Siser blade holder for the 45° an 60° blades, 
  Siser blade 45/60°, 
  Cutting mat for the heat bed.(or double sided tape on ruined old plate)

   

   
   
   
   

   

Notes:

• Seems that the cheap 5015's don't like fast xy movements, may cause rattling sounds (one Pengdlantu 5015 DC‑24 V fan does this in my setup, will try another/spare fan next iteration).

• Use a knife o.e to clean/slice up the nested support inside the small gaps at the top so covers will fit.