Antifog 30 degree adapter presupported and no support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Airsoft antifog silicone hoses tend to kink on tight turns. This solves this issue
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- GNU General Public License v3.0
There are other models of this but I wasn't really happy with printing them. Even when using really optimized supports or printing split and gluing them the solution is usually subpar. I decided to design my own. There's a pre supported and normal version. If you're printing in PLA or PLA+ my recommendation is using the pre-supported model. For other materials I can't make any recommendations.
Pre-supported:
The pre-supported version needs to be printed with a brim. I recommend around 5mm.
WARNING: THIS REQUIRES WELL CALIBRATED PRINTER AND MATERIAL.
But it's worth if for the finish and lack of post processing.
Normal model:
My only recommendation here is to use supports from this reddit post: https://www.reddit.com/r/OrcaSlicer/comments/15yjz2a/best_tree_support_settings_ive_used/#lightbox
Use a lighter to burn off the wisps from printing and reshape any deformities on overhangs