Chlorine dosing pump mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to install a Kamoer KCP-X pump on a Stenner 15g chemical tank.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
I needed to replace the chlorine pump for my pool, and I found a cheapie on Amazon. It needed a custom mount to install on my tank and shield it from the weather.
Printed in ASA without supports, but anything that can stand the outdoors would work fine, no particular strength or precision required so any fast draft profile will probably work. Assembled with 2 heat set inserts and M3 flush head screws
Kamoer KCP-X https://www.amazon.com/dp/B098RWZ4SV
Stenner STS15GC https://uswatersystems.com/products/stenner-gray-15-gallon-series-tank-for-45-85-pumps-sts15gc
M3 x4mm x5mm Heat set inserts https://www.amazon.com/Yaocom-Inserts-Threaded-Printing-Components/dp/B0DG59PW2R/ref=sr_1_4?s=hi&sr=1-4
M3 flush head screws https://www.amazon.com/Assortment-Machine-Countersunk-Stainless-Washers/dp/B0GFDL3KK5/ref=sr_1_4?s=hi&sr=1-4
It's a very specific need, but maybe it will help someone out.