Magnetic Forget-Me-Not Needle Minder for Cross Stitch/Embroidery (layer swap, no MMU/no AMS)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A magnetic needle holder / needle minder for cross stitching & embroidery, forget-me-not flower; 5x1mm or 3x1mm magnet
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
A small needle minder for holding sewing needles, using 5x1mm or 3x1mm magnets.
Designed for layer-swap color changes (no MMU/AMS). The subtle white lines are created using an 0.08mm layer, which makes them translucent so the blue below shows through nicely. A drop of superglue / cyanoacrylate glue will hold the magnets if they aren't quite tight enough with your print's tolerances. If it's too tight, you can scale it up 1-2%.
Print in pairs - the second one for the back (or use any model with an appropriate cut-out for your magnets).