BV3D Crystal Night Light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn an inexpensive plug-in night light into a glowing crystal accent light!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Turn an inexpensive plug-in night light into a glowing crystal accent light! The crystal is designed for Spiral Vase mode and works especially well with translucent or transparent filament, while the snap-together base requires no glue and can be easily disassembled if needed. There are three crystal sizes, so choose what works best for you: Short, Medium, or Tall.
You can pick up a four-pack of the same night light I used from Amazon with this affiliate link.https://amzn.to/4vWRG6p
Assembly is super easy:
Remove original diffuser from night light.
Slide on base, secure with C-clip.
Slide on crystal. Done!
I had fun designing this, and I hope you have fun printing and using it!
For the Base and C-Clip, use standard settings with a 0.2mm layer height.
For the Crystals, use Spiral Vase Mode with 0.2mm layer height, 0.8mm outer walls (works fine with a 0.4mm nozzle), and 20 solid bottom layers. See video for details.