1 / 1
AP201 SSD Cage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2.5" cage for AP201 supports up to 9.5mm drives. Bottom holes to mount are for m3x3mm heatset inserts. Print vertically.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Bottom holes are for M3x3mm heatset inserts. Print vertically for no supports. Should work with any case that uses standard ssd pattern for bottom mounting a drive.