Fuse Box Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for M25 x 1.5 Strain Reliefs fitting for a IP40 36Modules fuse box by INTRATEC
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Fuse Box Strain Relief
This model is an adapter designed to fit four M25 x 1.5 strain reliefs onto the top section of an IP40 fuse box by INTRATEC.
Print Settings
Material: PETG (recommended for durability)
Profile: Standard profile
Supports: Required! Make sure to activate supports.
Assembly Instructions
Prepare the Fuse Box: After printing, you will need to cut a section out of the top cover of the fuse box.
Use the Template: Print the provided
template.pdfon standard DIN-A4 paper. Align it perfectly centered on the top surface of the fuse box to mark your cuts.Installation: Once the cutout is made, insert the M25 strain reliefs into the adapter. Then, simply clamp the printed adapter between the baseplate and the top cover. No additional hardware is needed.
Disclaimer: Use at your own risk! I accept no liability for any damaged parts or hardware.
Happy printing!
Dedication: This Model is dedicated to my Dad <3.