1 / 3
2.2 Beadloc Wheels for MrCrankyface's 3D printed truck — image 1
1 / 3

2.2 Beadloc Wheels for MrCrankyface's 3D printed truck

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

2.2 Beadloc wheels to fit standard r/c rock crawler tires on MrCrankyfane's V3 printed RC truck.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
23
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

2.2 Beadloc wheels to fit standard r/c rock crawler tires on MrCrankyfane's V3 printed RC truck. I have included offsets from 0 to -11 and a two piece wheel center. I have only printer the -2(front) and -7.5(rear). The -2 wheels are matched to the inside clearance depth of the original wheels, and the -7.5 on the rear line up nicely with those on the single tire rear axle.

Each wheel requires a Main Body, Outer Body, Clamp Ring, and 6 small screws (M2.5x6 or so). The 2pc needs a Main Body A and B, and has slightly different outer and ring parts.

Notes:

Only the single piece Main Bodies needs Support.

Post-Printing

The Main Body and Outer Body should fit together tightly. I used some M2.5 screws I had laying around to screw the clamp ring down, but the holes are smaller and can be drilled to size. The 2pc Main Body needs to be glued or welded together.

Category: R/C Vehicles

Tags