SharkTank Deathracer Mod

What is better than a shark?  A shark with laserbeams!!

This is a cosmetic Mod for the popular Deathracer Radio Control Combat System. The face of the shark comes from the excellent printable sculpture "Megalo-Rex" by @PrintedEncounter ::  https://www.printables.com/model/484470-land-shark-megalo-rex

The lasers will need to be assembled first.  The "laser beam" is optional, But the weapon bodies have conforming reliefs in the head of the shark so it would look odd without those parts. If you choose to print the "lasers" it is wise to use your slicer to cut them in half either horizontally or vertically, whatever works easiest in your slicer, then reduce speed to avoid tipping them over. Then you superglue the sections together. The weapon parts glue together using superglue, you then insert the "laser beam" with a few dabs of super glue to hold it in place.

Looking at the top of the head from underneath, you will see 5 holes in the mating surface close to the perimeter, located by the nose, cheeks, and neck. These are for m3 inserts. Make sure to get the exposed part of the insert just inside of the mating surface, and to clean up the mating surface with a knife so that the two parts of the head meet cleanly. The 4 smaller holes located in the recess of the head are through holes for m3 screws to mount the weapons. I used m3x16mm. The jaw then mates to the head using (3) m3x16 screws.