Compact & Adjustable Phone Stand with Space for Custom Artwork
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This phone stand allows for your own artwork on the base. It also is slim and presents for the best viewing angles.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
All the phone stands out there are too simple.
Let's step this game up with a nice adjustable stand at 6 different viewing angles. There is never the perfect angle for every situation. The steeper angles work best for portrait mode and the shallower angles work best for landscape mode.
Plus if you are on the go (like on the airplane tray table), this can pack away nicely. It lays at .25" thick (6.35mm). Size is 3.125" deep and 3.60" wide. (79.4mm x 91.4mm)
Possibly the best feature on this model is the large open canvas for you artists to go wild. The usable canvas space is 2.42" high and 2.55" wide (61.5mm x 64.8mm). As you can see, I put the University of Washington's logo on there with their “W”, matching along with the school colors of purple and gold. Sky's the limit here, I expect you to remix this with your clever artwork here. I made my stand .090" deep, and it prints upside-down (to help with the rod hooks). The artwork piece is printed at .077" thick which compensates for Prusament PLA to droop during bridging. This offset worked perfectly.
I used the Prusament PLA Galaxy Purple and the Colorfab PLA/PHA Pale Gold
I know I'll be judged for using imperial dimensions and screws. You can resize models from the 2-56x.3125 shoulder screws to M2x0.4x8 ones. You need 4 screws and superglue.
I only have the Prusa Mini, so I shared my gcode for that only.