1 / 1
Pottery Trimming Spinner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is used to apply downward pressure on your pots while you trim them to help add a bit more stability.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions, a 60mm diameter, and a 40mm diameter. Uses a standard 608 bearing in the middle.
I used PLA printed at basic settings with 20% infill. Print the top with the bearing slot facing the build plate with normal supports. The bottom can be printed with the bearing post facing up with no supports.