Box PiP (Print in Place) with Hinge. Parametric.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple box with different sizes
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Print in place. No additional assembly is required
2 walls or more. No support
2 top/bottom shell layers or default
The hinge and the latch may be a little tight after printing.
PLA and PETG
After printing PETG, the latch may be too tight. Wait for the model to cool down. If it's still tight and you can't open the box, open it carefully and use a file to trim the slots of the main box's latch.
In theory, you can increase the size of the model in the slicer proportionally. You cannot decrease it to avoid getting the hinge stuck.
Parameters in Fusion360
Open the file .fdz from the menu
Minimum size 30x30x17
The maximum size can be as large as you want, but the hinge will remain the original size.
Modify - Change Parameters
Enter the dimensions of the box, these are the dimensions without the lid
Update External References 1 or 2 times until the exclamation mark disappears
