Transport Box for ERSA i-CON PICO Soldering Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a transport/storage box for the ERSA i-CON PICO soldering station (made to print in Bambu Lab A1 Mini)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a transport/storage box for the ERSA i-CON PICO soldering station.
The main goal of this project was to design a case that can be printed on a Bambu Lab A1 Mini. Because of this limitation, the final design may look somewhat unusual: the model is split into several functional parts instead of being made as one large simple box.
The case consists of three main parts:
the main compartment for the soldering station;
a sliding additional compartment;
a lid for the main compartment.
The lid is fixed with M4 screws.
The power cable and plug are stored in the additional sliding compartment.
Inside the main body, there are dedicated holes for the soldering station feet. This helps keep the station in place during transport and prevents it from moving around inside the box.
Printing recommendation
I recommend printing this model in PETG, as it provides better toughness and temperature resistance compared to PLA, which is useful for a transport case intended for workshop tools.
Known issue
The only issue I have found so far is that the latch on the lid does not snap firmly enough. In some cases, it may open during transport.
Apart from this, no other problems have been observed during use.
Notes
This project was designed mainly as a practical protective transport box for my own soldering station. The unusual multi-part construction is primarily a result of adapting the model to the build volume of the Bambu Lab A1 Mini.
