Trezor T Monitor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storing Trezor-T handily next to your Monitor
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
A mount for Trezor-T to be handily available next to your monitor. I prefer placement on the left side.
Apart from printed parts there is a 1.5 mm thick carbon-fiber rod that works as a lead for the USB cable the Trezor T is connected with. The cap sits on top of the rod. Half of the cable is zip-tied to the rod, second half hangs down free. This way you can reach out for the Trezor and conveniently operate it while keeping the unit connected. Once you get the routine you can release it loose and it will nonchalantly swing back to its storage position and snug to its magnetick base.
The printed Arm with honeycomb pattern is designed to host the Trezor-T's original magnetic mount - this way the Trezor-T sticks to its place while stored. The Arm is provided both in left and right make - use the one as per your preference.
There are theree version of bases that are glued to the back of your monitor with double sided tape: left and right version for LG LG38WK95C monitor (or any monitor that is 18 mm thick. For a different model simply use the Plain version of the base - hopefully it will stick reliably just as the bespoke version for the LG monitor (the LG version sports larger glueing area and very descrete lip that clutches the monitor from the side).
The length of the rod is to be either aligned with the monitor - or an arbitrary lenght while the longer the better for convenient handling. I prefer placing the whole setup on the lfet side of the monitor so I can keep the connected Trezor-T in my left hand and work with my mouse (and/or keyboard) with my right hand. But both sides are possible.
Angle of the Arm is selectable so together with the Plain base the setup should be relatively universal (perhaps only monitors that are too thick - if there are still any in use - might not be the best fit).
This is more then 3 year old design - and works reliably all that time for me to my best satisfaction.