IKEA SOLVINDEN adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn the IKEA SOLVINDEN into a clean all-in-one solar garden light by mounting the original panel directly above the lam
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
These two 3D-printed parts allow the solar panel of the IKEA SOLVINDEN garden light to be mounted directly on top of the lamp instead of being placed separately on the ground.
The original SOLVINDEN lamp offers excellent value for money, but the remote solar panel can make installation less clean and convenient. This modification creates a compact, all-in-one garden light while keeping the original electronics and solar panel.
Features:
Mounts the original IKEA SOLVINDEN solar panel on top of the lamp
Creates a cleaner and more compact installation
Uses the original lamp and solar panel
Requires only two 3D-printed parts
small elektric modifications needed
Installation:
Print both STL files.
Remove the top of the solar panel.
Shorten the connecting cable to the desired length and solder the wire.
Replace the top of the solarpanel.
use the original groundpin
Mount the original solar panel on top of the adapter.
The result is a single integrated solar garden light with the panel positioned directly above the lamp.
Printing recommendations:
Material: ABS (recommended for outdoor use)
4 layers
Layer height: 0.20 mm
Infill: 20–30%
No support needed