1 / 4
Capacitor clamp for vertical mounting 40, 50mm and 51mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Capacitor clamp for larger caps like electrolytics or motor caps. Bracket is made for 40 and 50mm diameter caps.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
First clamps are made for 50mm diameter caps. But some "50mm" caps are actually closer to 51mm in diameter, so I made two versions. Height is 20mm. Mounting centres 64-65mm.
Clamp for 40mm caps added. Mounting centres 55mm.
Hole sizes are made for M4 screws.
I used PETG and 100% infill for printing.
9/8-26 update: I added dual versions with a 64mm centre spacing.
18/10-26 update: 40mm clamp added.