1 / 1
Knucklebone Begleri Hybrid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the knucklebone by Atomicstation I have updated it so you can use it as a knuckle roller or a begleri
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To use it you will need 2, 8x2 mm magnets, superglue, 2 hex nuts, and some cord.
To assemble you need to drill a hole in the magnet and glue it into the part. Once this has been accomplished you will need to tie the cord inside of the main part. Then repeat with another one of the parts. IMPORTANT MAKE SURE THAT THE MAGNETS ARE ORIENTED SO THAT THEY ATRACT EACH OTHER!!!