AEK mini - Apple Extended Keyboard Style 60-percent Keyboard Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 60-percent mechanical keyboard case inspired by the Apple Extended Keyboard II.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A 60-percent mechanical keyboard case inspired by the Apple Extended Keyboard II - based off the excellent design by skatardude10.
This case takes the iconic design of the AEK II and shrinks it down into a compact design that still preserves the unique aesthetic of the original keyboard. It even has an option for a cutout so you can attach an original vintage Apple badge to the case. Comes available with and without a battery cutout. With a battery, it should support LiPo packs up to 6mm thick (such as 605080) for soldered PCBs if you bend the switch terminals back before soldering.
Regarding PCB and plate compatibility; I designed this primarily around 4pplet's Cyber60 Alps Rev-D1 and a cut down AEK II plate, but the tray dimensions and screw placement should support a wide range of 60-percent PCBs and plates.
My Print Settings
Printer: Voron 2.4R2 250
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.1 - 0.2 mm
Infill: 40 - 100%
Filament: ABS
Notes: Large format printers should be able to print the case in one piece. Otherwise, use your slicer to divide the case in half and add your preferred connectors.
Post-Printing
I glued both halves of my case together after printing, filled any gaps and significant imperfections with glazing putty, then sanded everything nice and smooth. I used Rustoleum 2-in-1 automative filler primer for my base coat - just to help fill in any remaining imperfections, then a satin charcoal gray topped with semi-gloss clear coat. Gave it a really nice vintage PowerBook-like finish.