Mount for S3 AMOLED 1.75 inch GaggiMate ECP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is UNTESTED and EXPERIMENTAL.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is UNTESTED and EXPERIMENTAL. This was done at the prompting of Anthrox80 and TorxFighter from the Gaggimate Discord ECP discussion:
https://discordapp.com/channels/951416527721230336/1378844857426251918/1524394854048731297
The "base" design for the Lilygo and Waveshare are from the models provided by modsmthng so that it will fit the 1.75" S3 AMOLED round screens from Lilygo and Waveshare. The mounting components ("back" and "spacer") and “well placed holes” are courtesy of my Lilygo 2.1 ECP model.
Since my design bolts to the ECP from inside, I change the display mounting holes to mounting pins. No idea if those will fit.
My tools and methods are laughable, but still may produce reasonable results. I had to reduce the complexity of the STL from the modsmthng models, so details may have been lost. I also removed the identifying text because I was putting holes right in the middle of them.
I really have no idea how close to workable these are. Let me know how it goes. YMMV.
7/10/2026 - I removed the "top - short" as it wasn't really substantial enough. I also finely tweaked the Waveshare base so that the "top - tall" should fit smoother.
- Slack