BlueBoat-compatible Propeller Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Propeller shroud compatible with the Blue Robotics BlueBoat, originally designed for the RoboBoat 2026 competition.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
This removable propeller shroud is compatible with the Blue Robotics BlueBoat, and was originally designed for the RoboBoat 2026 competition by Shrey Patel. Ours were printed on a Bambulab X1E in PETG.
Each shroud consists of two parts. The bracket is directly attached to the boat. The shroud slides on top of the bracket and is held in place by a pin.
Additional components:
Part | Specifications |
|---|---|
Bracket Bolt | M6x40 socket head cap screw (stainless steel) |
Pin | Ring-Grip Quick-Release Pin, 3/16" Diameter, 2" Usable Length (zinc-plated steel) |