1 / 3
Anycubic Kobra X Filament Hub Disassembly Jig — image 1
1 / 3

Anycubic Kobra X Filament Hub Disassembly Jig

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple tool for opening and reassembling the Anycubic Kobra X filament hub. It releases all four locking tabs at once,

Rating
0 / 5
Likes
5
Downloads
21
Makes
0
Views
220
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Opening the Anycubic Kobra X filament hub can be difficult because the PTFE tube collector is secured by four locking tabs that must be released simultaneously. This is difficult to do by hand and can cause the internal components to scatter when the hub opens.

To use the tool, place the filament hub into the printed holder and press it firmly against a hard, flat surface. The tool pushes against all four locking tabs at the same time, allowing the outer shell to lift slightly. Once the shell is loosened, use a small metal pick or flat-head screwdriver to carefully release and remove it.

The holder keeps the internal components contained, so the springs, contacts, and other small parts will not fly everywhere when the shell opens.

The tool also makes reassembly easier. Place the internal parts back into the holder in the correct order, align the outer shell, and press it down until all four locking tabs snap back into place.

Basic instructions

  1. Place the filament hub into the tool.

  2. Press the hub and tool firmly against a hard, flat surface.

  3. Use a metal pick or small flat-head screwdriver to loosen the outer shell.

  4. Remove the shell while the internal parts remain supported in the holder.

  5. For reassembly, arrange the internal parts in the tool.

  6. Align the outer shell and press it down until all four tabs lock.

Use care when working around the metal contacts and small internal components.

Tags