1 / 2
Star Fox Inspired Belt Buckle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a belt decoration inspired by the buckle worn by Fox in Star Fox 2026 and Star Fox 64. Fits a 3.25cm/1.3in belt.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a belt decoration inspired by the buckle worn by Fox in Star Fox 2026 and Star Fox 64. Fits on a belt around 3.25cm/(1+5/16)in (tall) and 0.75cm/(5/16)in (thick) with a little bit of wiggle room to spare. Don't forget to measure the end of the belt that may be thicker than the middle. Print the loop on its side, print the buckle however you want (probably flat with support in the middle), glue them together where the points enter the grooves.