1 / 9
BCN3D+ 1.75mm mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this mod you will be able to use any J-Head extruder with your BCN3D+ by BCN3D Technologies. you will need to fit…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 30
- Makes
- 0
- Views
- 513
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
With this mod you will be able to use any J-Head extruder with your BCN3D+ by BCN3D Technologies.
- you will need to fit the fan to your specific hotend, here some options: 1, 2, 3, 4, 5
- my hotend is 5mm longer (compared to the original BCNozzle) so the layer fan got too high. I lowered it by increasing the height of the layer fan holder: here you find the original one in case you have a different height.
- some M3x10 screws
- some M3 nuts
Print Settings
Printer Brand:
RepRap
Printer:
BCN3D+
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Category: 3D Printer Accessories