ER11 collet magnetic storage tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple tray to hold multiple ER11 collets that are held in place with magnets.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
My design for a storage tray for ER11 collets for your CNC/milling machines. There are many others out there, but none quite fit what I wanted and they were all stl files which made changing them difficult.
Features:
Labelled for a 13 set of metric, one 1/4” and one 1/8”
The holes for the collets have an embedded magnet (2.5x7x2.5mm) to the collets stay in place and giving a nice satisfying “click” when putting a collet back in
A little try in the front for some wrenches to swap out collets in your machine
4 places to embed some 1” stainless washers to add some heft to the tray (see attached pic)
The plane for the collet holes are angled, making them easier to take out
A gosh-darn step file so you can modify it easily. I can also provide the fusion 360 project if anyone wants it.
In the cross section pic you can see where the washers and magnets go.