2.5" Drive enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case that converts and internal 2.5" SSD or HDD to an external storage device with the apropriate adapter.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 32
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case that converts and internal 2.5" SSD or HDD to an external storage device with the apropriate adapter.
The case has a few places where you can write a label.
Drive is protected inside the case by two soft bumpers.
This case is designed to work with the ican SATA to USB adapter, both USB-C (Here) and USB-A (Here) versions work.
Printing:
I recomment printing the bumpers out of TPU or something soft.
Case and face plate can be printed out of PETG or PLA.
No supports needed, recommend brim on case as it is fairly tall and narrow.
Assembly:
1. Put both bumpers onto the drive.
2. Connect the SATA adapter to the drive.
3. Put the face plate over the adapter.
4. Align the assembly arrows of the face place and the case then push to close.