PSP-1000 Bluetooth (non-invasive)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printed Bluetooth adapter mount designed to affix to the top of the PSP-1000. Ergonomic and removable.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
A 3D-printed backplate that mounts a Bluetooth audio adapter to the top of a PSP-1000 — no soldering, no case modification, fully reversible. The adapter anchors into the PSP's Mini-USB port and connects to the headphone jack with a short coiled aux cable.
Bill of Materials
Item | Qty | ~Cost | Source |
|---|---|---|---|
Ankilo Aux Bluetooth 5.4 Adapter | 1 | $8.00 | |
90° 3.5mm TRS-to-TRS coiled microphone cable | 1 | $2.50 | |
Mini-USB 5-pin Type-B male plug (from 10-pack) | 1 | $1.65 | |
3D-printed Bluetooth backplate | 1 | — | Print yourself |
3D-printed mounting stud | 2 | — | Print yourself |
**Total parts cost: ~$12
See attached assembly_instructions.zip for further details.