3M Hat Hook
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.24 – €0.30 net (excluding VAT)
For file: 3M Hat Hook_0.4n_0.2mm_PLA_MK4S_14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 14.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Hook using a Medium 3M Command Strip to hang hats (or anything else) on your wall with no permanent damage!
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 97
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
This is a Hat Hook I made to hold my hats in the closet. It was designed to use the medium sized 3M command strips that you can buy at Walmart or Amazon. The command strip is a bit visible under the hook, but it will be covered when something is hanging on the hook. Renter friendly!
I uploaded a blank version, but you can add a .05mm deep negative volume in PrusaSlicer to add your own Logo or Text!
Print Settings
PLA (or PETG) at 0.20mm height
15% Cubic Infill, 2 Perimeter Walls
Oriented with wall-facing face down