1 / 1
3D.PrintLogo for Cap - UpDate Logo to screw on
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D.PrintLogo for Cap - UpDate Logo to screw on
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 69
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3D.PrintLogo for Cap - UpDate Logo to screw on
If you’re not taking your cap off whilst enjoying the best hobby in the world, you should also show what it’s all about. Here’s my logo design, which fits anywhere there’s a small hole. The back is secured with a small clip.
UpDate: If you don’t want to punch a 3mm hole in your cap, you can now use 2 or 4 small screws instead.
Print it without support at 0.15 mm using a 0.4 mm nozzle, and you’ll be done in 15 minutes.
HAPPY.PRINT:-)