Airsoft P90 Body Peg (connecting upper and lower)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement body peg for airsoft P90 AEGs, to join the upper to the lower receiver.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
The part that joins the upper receiver to the lower / body in the front of airsoft P90 AEGs.
If you fall muzzle first, this part may break, but it is a separate part from the main body and easily replaceable.
Just undo the 4 foremost body screws, lever the body apart with a pick, and you can pull out the broken part.
Measurements are best effort and should be accurate to within 0.1mm, if it doesn't fit properly you can adjust the parametric freecad file.
The 90° overhang has a 0.2mm height offset to account for plastic flowing into the support gap. Can also be adjusted in the source file.