Waveshare ESP32-S3-Eth Case for esphome-econet Project
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case to hold a Waveshare ESP32-S3-Eth, a MAX13487 TTL to RS485 converter, and a RJ11 breakout adapter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case to hold a Waveshare ESP32-S3-Eth with PoE module, a MAX13487 TTL to RS485 converter, and a RJ11 breakout adapter. This was made specifically for the esphome-econet project.
The model was made with specific tolerances to allow for all items to be friction fit within the case.
To get the honeycomb pattern for the lid, adjust slicer settings to 0 top and bottom layers & set the infill to honeycomb. Another adjustment can be made for the infill angle to line it up parallel with the rest of the lines if that's desired.