Funnel and Stand for Bialetti Moka Pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel and Stand for Bialetti Moka Pot
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 247
- Makes
- 2
- Views
- 1,970
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
General
This is a funnel and stand for the Bialetti Moka Pot. Provided are STLs and OpenSCAD files.
Funnel
The funnel STL is for the 6 cup moka pot but if the smaller pots have smaller inside diameters, I could easily add them if someone could message me the measurements. The SCAD can be adjusted (update the null on lines 8 or 9 with the correct value).
Stand
Print the stand in vase mode. If your line width is something besides 0.4mm, you can adjust the line width in the SCAD file to match what you'd like to print at.
The stand should fit all sizes of filter. When printing the stand, I printed with supports and then pushed them out from the bottom quite easily. I think you should be able to print without supports if you feel confident with bridging on your printer.