Nash 1952 Sedan inspired Toycar
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.14 net (excluding VAT)
For file: The Rims_0.2mm_PLA_MK3S_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.13 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Printing files included. You need 4 M3 screws 6 to max 10 mm long. Glue the parts together. May need some sanding.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Share Alike
First print all parts. Then glue the cabin, the body, the grille and the bumpers together. Screw the rims to the axles and put the tyres on. Then glue the axles under the body.
I used pla for the parts, except for the tyres. The tyres are made from TPU.