1 / 2
Bed slat holder / Lattenrost Haltekappe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps the bed slats in place. The parts have to be fixed by nails to the bed frame. The slats clip in.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
I made these parts after the old bed slat holders became brittle and broke.
They have to be nailed onto the bed frame, and the slats clip in. I have added latches to the flexible parts, helping you to pry them apart when inserting the slat.
I have no idea if bed slats always are the same size - mine are about 52 mm wide, and 8 mm thick.
Printed in PETG, and does not need any supports for overhangs. Good to use up your old filament - it doesn't need to be pretty, since no one will see it.