1 / 2
Suzuki Alto Works 4th Gen DIN Storage Cubby/Shelf (HA11S/HB11S/HA21S/HB21S) — image 1
1 / 2

Suzuki Alto Works 4th Gen DIN Storage Cubby/Shelf (HA11S/HB11S/HA21S/HB21S)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A very basic design to convert an empty 2DIN frame for the HA11S/HB11S Alto Works into a 2-shelf storage cubby.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

A very basic design that converts an empty 2DIN/Double DIN frame into a useful storage cubby. This was designed to be installed without a metal radio cage in place, purely just the black dash trim. It has a hole in the corner of each shelf to be able to pass through USB cables (wireless charger etc.).

I made this for my 1995 Alto Works HA11S model but it should fit other variants, providing they have the same 2DIN dashboard trim/frame as the pictures. It reuses the 4 original M4 mounting screws featured in the frame, I don't have the original screws so I'm not sure if you'll need longer screws - in my case the only screws I had were too long so I had to use washers.

If you're more experienced at modelling PLEASE feel free to improve my model and use it as a base! I'm very much a novice at modelling and this is my first 'functional' type of print so It can definitely be improved :)

I would recommend printing in PETG or stronger to withstand higher temps inside the car. I have printed with PLA which is working so far but I'm not sure how It'll withstand the summer heat!

Tags