Jonsbo N3 Front 200mm fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jonsbo N3 Front 200mm fan
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- BSD License
Front panel for using a 200 mm fan. I used the PHANTEKS F200SP with the standard mounting distance of 154 mm.
First of all, I wanted to reduce the noise from three 90 mm fans (two case fans for the HDDs and one CPU fan) by replacing them with a single larger fan. The fan is installed as an exhaust fan in the case. As a result, the temperature of the six installed HDDs dropped from 40 to 30 degrees, with an acceptable noise level (the fan speed is regulated based on the CPU temperature).
The model was 3D‑printed using PETG, with a 0.4 mm nozzle and a 0.2 mm layer height.
For mounting in the case, I used 8 magnets (10 × 3 mm), but in practice this turned out to be excessive — a single magnet per mounting point is sufficient.
Additional files include the source file for editing in KOMPAS-3D (free 30‑day trial available at ascona.net)