Bike Stand with wood strips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Bike Stand which uses 10x29mm wood strips for the rails and feet.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A mixed-media bike stand that avoids printing long strips of plastic where a different material is superior.
Wooden-Strips Bike Stand
A bike stand with wood strips, designed for 700c wheels with tires up to 38mm wide.
Prints without supports — all parts are already oriented for printing. You can either start from the provided project file, or print the individual parts:
4 × foot
1 × central block
1 × front block
1 × upper block
Wood
I used 10×29mm wood from Bauhaus. The holes in the printed blocks are sized 9.4×28mm to match.
You'll need:
4 × 38cm lengths for the struts
2 × 50cm lengths for the legs
Optional screws — I run mine without any, since the fit is tight enough on its own
Note: this adds up to more than one 240cm strip, but I prefer the longer legs for extra stability.
In case your wood has slightly different dimensions, the provided FreeCAD file has a VarSet in the "central-block" part where you can adjust the fitting.
Wood I used: Bauhaus link
Print settings
I recommend upping the perimeter count for added strength, since these parts carry structural load.