ZeroG Nebula Stepper AB 4010/4020 Cooling Fan Frame Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan Mounts For ZeroG Nebula Frame
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 7
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Fan Mounts to put 4010/4020 fans directly over you stepper motors for active cooling in the ZeroG Nebula frame.
Hardware Needed for 4010 Fans.
12x M3x12 SHCS
8x M3x5x4 Brass Heat Set Insert
4x Roll in T-Nuts
2x 4010 Fans
Hardware Needed for 4020 Fans.
4x M3x12 SHCS
8x M3x25 SHCS
8x M3x5x4 Brass Heat Set Insert
4x Roll in T-Nuts
2x 4020 Fans
I recommend printing in ABS/ASA if used in an enclosure.
Print settings: Same as Zero G Mercury 1. One settings
First layer height: 0.25mm
Layer height: 0.2mm
Extrusion width: 0.4mm, forced
Infill pecentage: 40%
Infill type: Adaptive Cubic, grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4
Solid top/bottom layers: 5
Seam placement: REAR