Toadstool — twist-open bonbon capsule
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tiny Amanita-muscaria toadstool that twists open to hide a wrapped bonbon or candy inside.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
A tiny Amanita-muscaria toadstool that twists open to hide a wrapped bonbon or candy inside. The red spotted cap is a screw-off roof; lift it and a clean toadstool stalk is revealed — an Amanita skirt ring and a soft volva bulb at the base — with a hollow chamber for a treat.
Designed to the 2.7-inch (68.6 mm) BONBON capsule: closed it is Ø46 × 52 mm with a min bounding sphere of Ø58 mm, so it drops into the capsule with room to spare.
What's in this listing
STL | What | Filament |
| Toadstool stalk + candy chamber + external thread | tan / stone |
| Mushroom roof, 2 named solids ( | red + white |
| Same cap, single colour | red |
| White spots only | white |
Multi-colour (Bambu Studio AMS)
Import cottage_cap_2color.stl → right-click → Split to Parts → assign red to cap_red and white to cap_spots. Coordinates are locked, so the spots land perfectly. Single filament? Just print cottage_cap.stl.
Printing
Body: flat base on the bed, collar up. No supports.
Cap: wide rim on the bed, dome up (narrows to the apex → zero overhangs, spots face up). No supports.
0.2 mm layers, 3 walls. All walls ≥1.5 mm; the coarse 3 mm-pitch thread prints clean at 0.2 mm.
Using it
Twist the cap on once to seat the threads (2–3 turns, snug not tight).
Drop a wrapped candy (≤ Ø24 mm through the neck; chamber holds ~Ø28 mm).
Screw the mushroom roof back on. Surprise sealed. 🍄
Parametric source
The OpenSCAD .scad is included. Knobs at the top: body_d / body_h / wall (stalk size + shell), cham_bore_d (candy opening), thr_crest_d / thr_pitch / thr_len / thr_clear (twist thread — raise thr_clear if tight), cap_d / cap_h / cap_wall (mushroom roof), spot_list (spot placement). Fork it, resize, share what you make.