Russian Juggling Ball (60mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
60mm two part Russian juggling ball.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- GNU General Public License v3.0
That setting is called "Random" seam position in PrusaSlicer (Print Settings → Layers and perimeters → Seam position). Here's the updated version:
Materials
I've only printed this in TPU (95A, 90A, and 85A). BASF 85A gave me the best results. It will probably work fine in PETG or PLA, but I haven't tried it.
Recommended print settings
Print slowly
Layer height ≤ 0.15 mm to prevent bridges collapsing near the top
Set seam position to "Random"
Use a 4 mm skirt
Dry your filament! With slightly moist Elegoo TPU printed at high speed, I had to cut the skirt off with a scalpel. With fully dried BASF slow print, it peeled off cleanly.
Assembly & use
Fill with salt, millet, rice, or similar for weight.
I haven't found the best way to seal it yet (heat or glue), but it holds together surprisingly well even without sealing.
Notes
I'm not sure how the tolerances will hold up if you scale the model to a different size.