Radici del Tempo - Clessidra Portachiavi (Gothic Root Hourglass)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Portachiavi clessidra con ramificazioni e multicolore. Keychain hourglass with roots and multicolor.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
this hourglass was created in gemini, starting from a prompt and an idea i had. not knowing how to use blender (i can't even rotate the view), i went to copilot and had it generate the stl file split in two, which you can find uploaded here. i resized, merged, and filled in the missing parts. as you can see from the photos, it didn't turn out badly, despite my skepticism. so much so that i wanted to publish it here because i like the idea of sharing it with others and making my work available for improvement by truly capable people. as you can more or less see from the photos, it turned out well, except that there's a bit of sagging on the black roof section. i think it needs supports, but i didn't add any, and it came out like this. i'm fine with it, but feel free to tweak it, republish it, etc. i made it with a 0.6 nozzle and only pla, using bone white pla, black pla, and glow-in-the-dark pla inside. the files i uploaded are a 3mf and two stls: i cleaned up the settings for the 3mf but left the colors, while the other two files are an stl with the hourglass already assembled (just missing the colors) and an stl with the hourglass disassembled and incomplete. feel free to modify it however you like, and i'd appreciate it if you could show me what you've done because i'm very curious. thanks.
questa clessidra è stata realizzata su gemini, partendo da un mio prompt e da un'idea che mi è venuta. non sapendo usare blender (non riesco nemmeno a ruotare la visuale), sono andato su copilot e ho fatto generare a lui il file stl diviso in due che trovate caricato; io ho ridimensionato, unito e creato ciò che mancava. come si può vedere dalle foto non è uscita male nonostante il mio scetticismo, tanto che ho voluto pubblicarla qui perché mi piace l'idea di condividerla con gli altri e mettere a disposizione il "lavoro" per farlo migliorare eccetera a gente effettivamente capace. come più o meno si vede dalle immagini è andata bene, solo che sulla parte del tetto nera c'è un po' di sagging; credo abbia bisogno di supporti, non lo so, io non li ho messi ed è uscita così. a me va bene così, ma sentitevi liberi di darle una sistemata, ripubblicarla eccetera. io l'ho fatta con ugello da 0.6 con solo il pla e ho usato il pla bianco osso, il pla nero e il pla fosforescente all'interno. i file che ho caricato sono un 3mf e due stl: il 3mf l'ho ripulito dalle impostazioni che ho messo ma ho lasciato i colori, mentre gli altri due file sono un stl con la clessidra pronta già montata (mancano solo i colori) e un stl con la clessidra smontata e incompleta. sentitevi liberi di modificarla come volete e gradirei mi mostraste ciò che avete fatto perché sono molto curioso. grazie.
