Hikoki M1808DA router base x 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Copies of the Hikoki M1808DA I made it partly to use as a base for further remixes, and as an accuracy exercise.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions, the only difference is the individual mm markings - on one they are proud/raised; on the other they are recessed.
Choose whichever suits your printer (they are 0.1mm width so YMMV).
Printed at 0.15mm for detail around the measurement face, but not necessary.
This was made as a base for further remixes and also as an exercise in accuracy and drawing with Tinkercad. I went looking for a guiderail attachment to suit my router but could only find other brands, so I decided to make my own. This base plate is the starting point.
PETG at 015mm yielded a good result.