Animatronic Endo 2 Pack

This is a 2 pack of my Animatronic Endo 01 & 02 for people who want to bring both to life for a more affordable cost then buying them separate.

ENDO 01 INSTRUCTIONS:

This is an animatronic head based off of Endo 01 from Five Nights at Freddy's. This is a fairly simple animatronic with 3 main movements. Each eye can move left and right, each eyelid can move up and down, and finally the jaw can move so you can have it sing any song! if you have any questions or concerns let me know! I should respond within 2-4 days.

Materials:
-4 Micro Servos
-1 MG 996R Servo
-3 Paper Clips
-Super/Hot Glue
-Spray Paint & Acrylic Paint

Screws:
-4 SG90 Screws (They Come With Micro Servos
-2 3.54mm Screws

UPDATE #1: The Main Head, Upper & Lower Jaws & Teeth Have Been Updated.

This Video Below Functions As Extra Instructions For Both Endo 02 AND Endo 01. All The Things I Say About Endo 02 Can Be Applied To Endo 01.

Video Link: https://youtu.be/ACBPJDuTHo0?si=4atEV0Oqv5ICNyFS

ENDO 02 INSTRUCTIONS:

I do not own any rights to Five Nights At Freddy's at all. Scott Cawthon is the creator not me. I'm not very good with sharing instructions so I will like a Youtube Video on how I assembled him. If you find any problems with the model let me know and I will fix the model as soon as possible. Note: my models aren’t perfect so I can try and help or fix any error you might occur.

Supply's Needed:
-4 Micro Servos
-1 MG 996R Servo
-3 Paper Clips
-Super/Hot Glue
-Spray Paint & Acrylic Paint

Types Of Screws Needed:
-4 SG90 Screws (Comes With Micro Servos)
-2 3.54mm Screws (Very Random)
Here is the link to the YouTube Video for the tutorial: https://youtu.be/ACBPJDuTHo0?si=2AU3IHDwdz8QQmYl

ALSO THE NECK CANNOT KEEP HIS HEAD UP! EXTRA WEIGHTS WILL BE REQUIRED ON THE BASE

These are the settings I use for Cura Slicer, Also I use a Ender 3 V3 KE.

Infill: 20%

Supports: On

Support Type: Tre