Dry Fit Dominos for Festool | Single and Multi-Color
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Undersized dominos for test fitment
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 1
- Views
- 143
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are dominos sized for doing dry assembly and test fit before final assembly/glue-up. Use these to preserve your actual dominos and sanity. They will fit with enough hold to not fall out, but not require gorilla forces to remove.
This design uses a rounded chamfer so that there is no large overhang on the print bed that exists in other designs that are fully rounded. The print quality is therefore better but still has the rounded appearance.
Print a test at default scale first and test for fit before committing to batch printing. Adjust the Z scale using very small increments (decimals) if you want to adjust it. Don't adjust X or Y scaling.
Single and multi-color versions are available.