Heffe MP3DP2 Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Non standard parts for my MP3DP.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Hi, these are the parts I used to make this printer my own.
Some non-standard things I've added:
- E3D v6 extruder. Cuts down on total Z travel, but I wanted the 3:1 reduction and didn't want to spend the money on the titan aero.
- BLTouch. I am a fan of auto level and this sensor is the best.
- TMC2130 drivers, and sensorless homing
PTFE for filament feeding
These parts are partly to accomodate that, but I think also to make the X mount a little beefier. The 8mm rod clamps, for example are to make the sensorless homing stop in the right place.For the 8mm clamps, they are 10mm tall, IIRC. Just scale the Z to how long you need them.
For the PTFE holder, this holds 3mm PTFE and mounts to the back of the printer in the corners. I think this is for the upper left, and the upper right needs to be mirrored. You'll need longer #6-32 or M4 screws.
The BL mount attaches to the bottom of the Extruder mount, and it's only really helpful if you have a longer e3d v6.
Print instructions
Category: 3D Printer Parts