1 / 2
40 mm Coin Jig for UV printing [for Ultim8 Jig] — image 1
1 / 2

40 mm Coin Jig for UV printing [for Ultim8 Jig]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A coin jig for the Ultim8 Jig by Wham Bam Systems

Rating
0 / 5
Likes
6
Downloads
52
Makes
0
Views
163
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

While Wham Bam Systems already provides some jigs on their support page, there is none for common 40 mm metal coin blanks - yet.

Notes

The design is not symmetric. Because of its odd length the feet needed to be moved on one side. You can still print two, but they'll only align on the jig if one of them gets rotated by 180 °.

Included in the ZIP archive is a eufyMake Studio file. I wanted to provide contours, but these didn't work properly in version 4.1.2 for me, so you have to get by with black circles (locked and marked to skip printing) to align your designs. 

Printing

Print with your favorite material and settings. I'd suggest a layer height of 0.2 mm.

Support is needed on the build plate because of the jig's feet.

I do not include supports by default, because your slicer should be perfectly capable to generate them itself. Plus you can adjust them to what works best for your printer and material.

License remark

Me using a "non-commercial" license does not prohibit you from using these commercially to print on bottle openers. But please do not sell the jig or the file itself.

Tags