1 / 1
280Z Headlight Connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the connector that plugs into the harness and runs to the headlights on the other end.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Useful if you're doing a relay upgrade or need to make a new set of wires from the harness to the headlights and don't want to cut your harness. Factory on the right, printed (black) on the left. Print in a high temp filament like ASA, etc. The large bullet pin is 4mm and the small ones are 2.5mm.