XIAO nRF52840 with Battery Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure to house the XIAO nRF52840 chip, a 42x30x6mm battery, and slide switch
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
An enclosure to house the XIAO nRF52840 chip (initial version assumes header pins are soldered to the chip), a 42x30x6mm lipo battery (I used MakerHawk 3.7v 700mAh). The OpenSCAD file allows you to print the lid either with, or without, a cutout for a slide switch. Specifically, dimensions of (or this exact) model slide switch.
The SCAD also lets you select whether to export the bottom or lid. Parameters are adjustable to remove slide switch cutout, adjust battery size (if using a different model), etc.
There is also a hole in the sidewalls (which passes through the interior) in case another button or u.FL connection needs to pass through.